- Easy to install and use, dual temperature scale (F/C)
- Snap acting Switch (magnetic Switch) does not require leveling and is mercury free
- Bimetal temperature sensor
- Compatible with 750 m heating only systems – forced air (gas, oil and electric) and hot water/steam
This mechanical thermostat offers precise temperature setting for your 750 millivolt systems. It is designed specifically for steam and gravity heating systems as well as gas fireplaces.
| Auto System Change from Heat to Cool | No |
|---|---|
| Use with Electric Baseboard 120V-240V | No |
| Series Name | Honeywell Home manual thermostat heat only – millivolt |
| Shape | Square |
| Single-Stage Heating and Cooling | No |
| Switching Mechanism | Mechanical |
| Temperature Displayed | Set temperature only |
| Type | Thermostat |
| Use with Floor/Wall Furnace 24V or 750mV | No |
| Multi-Stage Heating and Cooling | No |
| Use with Pellet Stove for mV Thermostats | Yes |
| Use with Volt Gas Fireplace 24V or 750mV | Yes |
| Voltage(Volts) | 24 |
| Warranty | 1-year limited |
| Width(cm) | 7.9248 |
| Width(in) | 3.12 |
| Width(mm) | 79.248 |
| Safety Listing | CSA safety listing |
| High/Low Desired Temperature Limits | No |
| Backlit Display | No |
| Cooling Only | No |
| Compatible with Central Air Conditioning | No |
| Compatible with Heat Pump (No Aux./EM) | No |
| Compatible with Heat Pump (With Aux./EM) | No |
| Compatible with Hot Water | No |
| Compatible with Steam or Gravity | Yes |
| Compatible with Warm Air Furnace | No |
| Depth(cm) | 2.2352 |
| Height(mm) | 79.248 |
| Depth(in) | 0.88 |
| Depth(mm) | 22.352 |
| Display Type | Analog |
| File/Certification Number | N/A |
| Heating Only | Yes |
| Height(cm) | 7.9248 |
| Height(in) | 3.12 |
| Wiring Type | 2-wire |
Be the first to review “Honeywell Non Programmable Thermostat – 750 MV” Cancel reply
Related products
-57%
-30%
-30%
-60%
-30%
-70%
-72%
-30%








Reviews
There are no reviews yet.